Type 8045 – Insertion Magmeter in Stainless Steel

Ordering Chart
Relays Sensor Connector Item no.
No Short 2 cable glands M20 449 670
  Long 2 cable glands M20 449 672
2 Short 2 cable glands M20 449 671
  Long 2 cable glands M20 449 673
Note: Delivered with 1 set 551 775 and 1 EPDM gasket.


With a stainless steel insertion finger and high quality electronic display module this unit is perfect for contaminated or aggressive fluids. 4 to 20 mA and pulse output with optional 3A relays makes this a flexible solution for flow control, batching or CIP control in FDA applications.
Technical Data
Size range 1/2" - 16"
Measuring ranges 0.7 - 33 ft/s
Measuring error (teach in) ≤ ±2% o.R. (3.28-32.81 ft/s)
Measuring error ≤ ±4% o.R. (3.28-32.81 ft/s)
Linearity ≤ ±(1% o.R. + 0.1% o.FS)
Repeatability ±0.25% o.R.
Housing material PPA
Electrode material 316L SS
Mag-sensor material 316L SS (FDA compliant)
O-rings FKM
Max. fluid temperature 212 °F
Ambient temperature range 14 °F to 140 °F
Max. fluid pressure 232 PSI (depending on fitting)
Fluid conductivity > 20 μS (Micro-Siemens)
Voltage supply 18…36 VDC
Current consumption max. ≤ 300 mA
Electrical protection Short circuit and reversed polarity protected
Electrical connections M20 cable glands (optional 1/2" conduit)
Outputs 4 ... 20 mA
Transistor, Max. 100mA, frequency 0...240 Hz
Relay output 3 A/250 VAC
Output load Max. 1300 Ω at 36 V
Max. 700 Ω at 18 V
Ingress protection IP65
Options
  • PVDF finger for 176 °F and 87 PSI with PC housing
  • Hastelloy electrodes
Envelope Dimensions [inch] (see datasheet for details)
Type 8045 Envelope Dimensions
  A B C
Short 3.48" 3.48" 7.08"
Long 3.48" 3.48" 8.64"

Contact Us | Terms and Conditions | Privacy Policy

© 2017 Bürkert Contromatic Corporation (USA)