Type 8222 Element – Conductivity transmitter

Ordering Chart
Voltage supply Outputs Sensor version Item no.
PVC PVDF
14-36 V DC 2 x transistors + single 4-20 mA for process conductivity only
5-pin M12 male fixed connector
C = 0.01 562 394 562 396
C = 0.10 559 624 559 626
C = 1.00 559 638 559 622
12-36 V DC 2 x transistors + dual 4-20 mA for both temperature and conductivity, 5-pin M12 male and 5-pin M12 female fixed connectors C = 0.01 562 395 562 397
C = 0.10 559 625 559 627
C = 1.00 559 639 559 623
Accessories (for 8202 pH and 8222 conductivity) Item no.
display (programming puck) only 559 168
M12 5-pin female with 6' cable 438 680
M12 5-pin female connector 917 116
M12 5-pin male with 6' cable 559 177
M12 5-pin male connector 560 946

Conductivity transmitter with programmable outputs. Conductivity and temperature output via single or dual analog 4-20 mA. Two transistor outputs are also included. Transmitters are engineered for a wide scope of measuring ranges and can be delivered in 2-wire or 3-wire configurations. Intelligent, integrated, beautiful design fits perfectly with an assortment of easily configured fittings.
Technical Data
Measuring range 0.05 μS/cm ... 10 mS/cm , -4 ... +266 °F
Measuring error ± 3% of measured value, ± 1.8 °F
Temperature
compensation
Automatic via integrated temperature sensoracc. to a predefined graph (NaCl or ultra-pure water)
Available fitting materials Stainless, PP, PVC
Housing material Stainless steel, PPS, PC
Insertion finger PVDF/SS for 0.01 or 0.1;
graphite for 1.0
O-rings EPDM
Fluid temperature -4 °F...+212 °F (depending on fitting) (PVC 32 ... 122 °F)
Max. fluid pressure 232 PSI (depending on fitting)
Ambient temperature 14 °F to 140 °F
Storage temperature 14 °F to 140 °F (without probe)
Ingress protection IP65, IP67, NEMA4X
Voltage supply 14...36 VDC for 2-wire models
12...36 VDC for 3-wire models
Protection Reversed polarity of DC and peak protected
Accreditations UL Recognized
Outputs 4-20 mA configurable temperature or conductivity 2 Transistors, configurable, open collector, 700 mA Max., 0.5 A Max. per transistor if the 2 transistor output are wired
Output load < 1100 Ω at 36 V
< 610 Ω at 24 V
< 180 Ω at 14 V
UL Recognized Component Mark for Canada and US
Envelope Dimensions [inch] (see datasheet for details)
Type 8222 Element Envelope Dimensions
A B C D
2.56 2.95 6.54 9.61

Contact Us | Terms and Conditions | Privacy Policy

© 2017 Bürkert Contromatic Corporation (USA)